Finely Adjusting The White Balance - Panasonic Lumix DMC-LC50 Operating Instructions Manual

Finely Adjusting the White Balance

If you cannot acquire the desired hue with white balance because of too many
different light sources, etc., adjust the fine white balance as follows.
Preparation
• Set the mode dial except for [
• Set the white balance to [
1
Press 3 until [
appears.
WB ADJUST.
RED
SELECT
Recording pictures (advanced)
]/[
]/[ ]/[
WB ADJUST.]
BLUE
EXIT
WB
]. (P29)
]/[ ]. (P60)
2
Adjust the white balance.
RED
SELECT
• 1 [BLUE]: Press when the hue is
• 2 [RED]:
• Close the function by pressing 4
after finishing the adjustment.
¬ Suggestions/Tips ¬
• The white balance icon turns red or blue.
• You can set the value independently for
each of the modes in white balance.
• The setting of the fine white balance is
applied to the recording with the flash.
• When you set the white balance using
the White set [
level is set to "0".
• The adjusted picture will be close,
though may not be identical to the
actual picture.
• When setting the color effect to
[COOL], [WARM] or [B/W] (P71), you
cannot adjust the fine white balance.
62
WB ADJUST.
BLUE
EXIT
WB
reddish.
Press when the hue is
bluish.
], the adjustment