Taking Pictures Using Auto Bracket - Panasonic Lumix DMC-LC50 Operating Instructions Manual

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically recorded by each press of the shutter
button according to the compensation range of the exposure.
You can select the desired exposure among the 3 types of pictures.
Preparation
• Set the mode dial except for [
1
Select [ AUTO BRACKET] and
set the compensation range of the
exposure.
AUTO BRACKET
SELECT
WB
2 times
WB
• You can select the exposure from
0 (OFF), n1/3 EV, n2/3 EV and
n1 EV.
• When you do not use auto bracket,
select [OFF].
Recording pictures (basic)
]/[ ]/[
¬ Suggestions/Tips ¬
• When setting the auto bracket, the
• Once you take a picture, auto bracket
• When taking pictures using auto
EXIT
WB
• When the flash is activated, you can
• When setting auto bracket, you cannot
• When setting auto bracket and the
WB
• The exposure may not be
• When the ISO sensitivity is set to
44
]. (P29)
auto bracket icon appears on the lower
left of the screen.
will be canceled automatically.
bracket after the exposure
compensation, the pictures are based
on the compensated exposure.
When the exposure is compensated,
the compensated exposure value
appears.
take only 1 picture. Auto bracket
setting cannot be canceled.
take a picture with audio.
burst mode simultaneously, auto
bracket will be performed.
compensated with auto bracket
depending on the brightness of the
subject.
[ISO400], the recording interval may
become longer due to the process to
reduce picture noises. (DMC-LC80)