Panasonic Lumix DMC-FX500 Operating Instructions Manual page 26

Preparation
| [VIDEO OUT]
•
This will work when the AV cable is connected.
[TV ASPECT]
•
This will work when the AV cable is connected.
[m/ft]
[TOUCH GUIDE]
[FORMAT]
•
Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) when
formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
• It may take longer to format the built-in memory than the card.
• If the built-in memory or the card cannot be formatted, consult your nearest Service
Center.
For USA assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
26
VQT1Q36
Set to match the color television system in each country.
(Playback mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
Set to match the type of TV.
(Playback mode only)
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
Change the unit displayed for the distance at which pictures can
be taken.
[m]: The distance is displayed in meters.
[ft]: The distance is displayed in feet.
Set the guide screen including Touch AF/AE or Touch Zoom to
display on the LCD or not.
[OFF]/[ON]
The built-in memory or card is formatted. Formatting
irretrievably deletes all the data so check the data carefully
before formatting.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com