Panasonic Lumix DMC-FX500 Operating Instructions Manual page 101

4
Double-click [DCIM] folder.
5
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
∫ Disconnecting the USB connection cable safely
• Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
Note
•
Do not use any other USB connection cables except the supplied one.
•
Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; optional).
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
• With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the SDHC
memory card to the [LOCK] position when importing pictures from an SDHC memory card.
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition)
Built-in memory
Card
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P25) in the [SETUP] menu has been executed
•
When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
•
When there is a picture with file number 999 inside the folder
∫ Connection in the PTP mode (Windows
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
•
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
mode.
DCIM
100_PANA
1
100_PANA
P1000001.JPG
2 3
P1000002.JPG
P1000999.JPG
101_PANA
999_PANA
MISC
1
Folder number
2 File number
3 JPG:
MOV:
MISC:
R
XP, Windows Vista
Connecting to other equipment
Pictures
Motion pictures
DPOF print
Favorite
R
and Mac OS X only)
VQT1Q36
101