2 or 3 pictures are taken at one time.
> Set auto bracket (P53), [HI-SPEED BURST] (P59) in scene mode or [BURST] (P73) of the
[REC] mode menu to [OFF].
The subject is not focused properly.
•
The focus range varies depending on the recording mode.
> Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera. (P32)
•
There is camera shake (jitter) or the subject is moving slightly. (P33)
The recorded picture is blurred.
The optical image stabilizer is not effective.
> The shutter speed becomes slower when pictures are taken in dark places so hold the
camera firmly with both hands to take the pictures. (P29)
> When taking pictures at a slow shutter speed, use the self-timer. (P46)
Taking pictures using auto bracket is not possible.
•
Is the number of recordable pictures 2 or less?
The recorded picture looks rough.
Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity. (P68)
> Increase the setting for [NOISE REDUCTION] in [PICT.ADJ.] or lower the setting for each of
the items other than [NOISE REDUCTION]. (P74)
> Take pictures in bright places.
•
Has [HIGH SENS.] or [HI-SPEED BURST] in the scene mode been set? If so, the resolution of
the recorded picture decreases slightly because of high sensitivity processing, but this is not a
malfunction.
The brightness or the hue of the recorded picture is different from the actual
scene.
•
If recording under fluorescent light, the brightness or the hue may change slightly when the shutter
speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction.
A reddish vertical line (smear) appears on the LCD monitor during picture-taking.
•
This is a characteristic of CCDs, and it appears when the subject has a
bright part. Some unevenness may occur in the surrounding areas, but
this is not a malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
•
It is recommended that you take pictures while taking care not to expose
the screen to sunlight or any other source of strong light.
Motion picture recording stops in the middle.
•
Are you using a MultiMediaCard? This unit does not support MultiMediaCards.
> When you set the picture quality to [÷], [ý], [ü], or [ÿ], we recommend using a
high-speed card with "10MB/s" or greater displayed on the package.
•
Depending on the type of the card, recording may stop in the middle.
Others
119
VQT1Q36