Playing Back Pictures On A Tv - Olympus IR-300 Advanced Manual

Playing back pictures on a TV

Set the camera in the cradle and connect the supplied AV cable to your TV to
play back pictures. You can play back both still pictures and movies on your TV.
1
Make sure that the TV and camera are turned off. Connect
the A/V OUT jack on the cradle to the video input terminal on
the TV using the AV cable provided with the camera.
2
Set the camera in the cradle.
Connect to the TV's
5
video input (yellow)
and audio input (white)
terminals.
3
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV's instruction manual.
4
Press the POWER switch to turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to select
the picture you want to display.
TIPS
• The close-up playback, index display and slideshow functions can also be used
on a TV screen.
• You can use the optional remote control (RM-100) to play back pictures on the
camera's monitor or TV. This lets you operate functions such as select, erase,
and protect, in the same way as you would with the camera's buttons. When
the camera is set in the cradle with the power being drawn from the AC adapter,
you can use the remote control to turn the camera on/off.
Note
• Make sure that the camera's video output signal is the same as the TV's video
signal. g"Selecting the video output" (P. 77)
• The camera's monitor turns off automatically when the AV cable is connected
to the camera.
• Be sure to use the AV cable provided to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
76
A/V OUT jack
AV cable (provided)