Olympus CAMEDIA C-740 Ultra Zoom Reference Manual page 166

Possible cause
The memory gauge
is full.
There is a problem
with the card.
The flash does not fire.
The flash is
retracted.
The subject is
illuminated.
Auto bracketing is
set.
The camera is in the
movie mode.
FUNCTION is set to
BLACK/WHITE
BOARD.
Super macro mode is
set.
Panorama mode is
set.
The viewfinder does not turn on.
The monitor is turned
on.
The camera is in the
sleep mode.
The monitor does not turn on.
The viewfinder is
turned on.
The camera is in the
sleep mode.
Corrective action
Wait until there is room in the memory gauge.
Refer to "Error codes".
Push the flash lever up to make the flash pop up.
If you want the flash to fire on a brightly
illuminated subject, set the flash to fill-in mode.
The flash does not fire in the auto bracketing
mode.
Set anoter mode in the DRIVE menu.
The flash does not fire in the movie mode. Set a
different shooting mode.
The flash does not fire in the BLACK/WHITE
BOARD mode.
The flash does not fire in the super macro mode.
Set the super macro mode to OFF.
The flash does not fire in the panorama mode.
Cancel the panorama mode.
Press f to switch to the viewfinder.
Operate the camera (press the shutter button or
the zoom lever).
Press f to turn the viewfinder off.
Operate the camera (press the shutter button or
the zoom lever).
Troubleshooting
Ref. Page
P.15
P.163
P.55
P.55
P.83
P.51
P.90
P.81
P.86
P.46
P.24
P.46
P.24
165
10