Troubleshooting
POSSIBLE CAUSES
The camera does not turn on or function buttons do not respond.
1 The batteries are
exhausted.
2 The power is off.
3 The batteries are
loaded incorrectly.
4 The batteries are
temporarily unable to
function.
5 It is connected to a
personal computer.
6 The camera is in the
sleep mode.
The green lamp and orange lamp blink at the same time.
1 The batteries are
exhausted.
1 The camera is in the
sleep mode.
CORRECTIVE ACTION
1 Replace the batteries with
new ones.
2 Set the mode dial to any
position except OFF to turn
on the power.
3 Reload the batteries
correctly.
4 The batteries may be too
cold. Warm them before use
by allowing them to return to
room temperature, or if
outdoors, putting them in an
inner jacket pocket.
5 The camera will not operate
while it is connected to a
personal computer.
6 Operate the camera (press
the shutter button, turn the
mode dial, etc.)
1 Replace the batteries with
new ones.
The monitor does not turn on.
1 Operate the camera (press
the shutter button, turn the
mode dial, etc.)
REF. PAGE
P. 19
P. 25
P. 19
–
–
P. 25
P. 19
P. 25
181