Table of Contents
Advertisement
Selecting white balance according to surrounding lighting 0
Press a or c to select [AUTO],
[5], [3], [1] or [>], then press
the OK/MENU button.
The selected white balance mode is set.
When the white balance mode is selected,
the white balance indicators [5, 3, 1,
>] are displayed at this point on the
monitor.
No indication is displayed when [AUTO]
white balance mode is set.
Set the white balance to [5] or [3] to capture a sunrise or sunset with
beautiful reddish tones.
The white balance feature may not be effective under some special light
sources, such situations where multiple lights are used.
If you set a white balance mode other than [AUTO], play back the picture
and check the colors on the monitor.
When the flash is fired with a white balance setting other than [AUTO],
colors may appear different in the resulting picture from those in the picture
you see on the monitor.
WB
WB
AUTO
SELECT
GO
WB
WB
>
SELECT
GO
Indicator
P
o
HQ
HQ
2272*1704
2272*1704
1
-1.0
-1.0
5
a
11
11
11
29
Advertisement
Table of Contents
