Oki C5550 MFP User Manual page 54

ITEM
Error Report
PCL emulation
ITEM CHOICE
RESIDENT /
Font Source
RESIDENT 2
Font No. I0~I89
0.44 CPI~10.00
Font Pitch
CPI~99.99 CPI
Symbol Set PC-8
A4 Print 78 COLUMN
Width 80 COLUMN
White Page
OFF/ON
Skip
CR Function CR / CR+LF
LF Function LF / LF+CR
NORMAL
Print Margin 1/5 INCH (5.08 mm)
1/6 INCH (4.24 mm)
CHOICE
ON/OFF
C5550 MFP User's Guide
Configuring your machine > 54
DESCRIPTION
If ON, the MFP will print error details
when a PostScript Emulation error
occurs.
DESCRIPTION
Specifies the location of the PCL
default font. Normally this will be
INTERNAL unless additional fonts are
installed in the expansion ROM slot or
additional fonts have been
downloaded to RAM as permanent
fonts.
Sets the current default font number
from the currently selected source,
which could be internal (I), ROM slot
(C) or downloaded (S).
Point size of selected default font.
PCL symbol set. If the font source and
number are changed to one which
does not support the selected symbol
set, this must be changed to an
available symbol set for that font.
Sets the number of columns subject
to Auto LF with A4 paper in PCL. This
is the value when Auto CR/LF Mode is
set to OFF with the 10CPI character.
Selects whether blank pages are
printed or not.
Selects whether a received carriage
return character (0Dh) also causes a
line feed.
Selects whether a received line feed
character (0Ah) also causes a
carriage return.
Sets the non-printable page area.
NORMAL is PCL compatible.