Oki C5550 MFP User Manual page 202

S 1 - G
TEP ATHER OR CREATE THE
Where can I get the profiles I need?
PROFILE
TYPE
RGB Source
(RGB Input)
CMYK
Simulation
(CMYK input)
Printer
(CMYK Output)
Link Profile
S 2 - D
TEP OWN LOADING
The internal hard disk must be installed in the printer.
You can download profiles to the MFP hard disk using the Profile
Assistant utility.
1. Launch Profile Assistant
2. Select an MFP
If this is the first time you have used Profile Assistant, you
should allow the utility to search for compatible machines.
Select the connection type "Network (TCP/IP)", and click
Start to begin searching.
If you know the MFP's IP address, you can enter it
manually.
3. The main screen of Profile Assistant displays the profiles
resident on the selected MFP's hard disk. To download a
new profile to the MFP:
(a) Click Add.
(b) Select an ICC profile from your computer's hard
disk.
ICC
WHERE TO GET PROFILES
Obtain your RGB source profiles from your scanner, camera
or monitor manufacturer.
Obtain the simulation profile from the manufacturer of the
printer you wish to simulate.
The factory default profiles for your MFP are built-in. If you
need greater accuracy, you should create your own MFP
profile using third-party ICC profile creation software.
You can create Link profiles using third-party ICC profile
creation software.
Note that not all ICC profile creation software can create
Link profiles.
ICC
PROFILES TO THE HARD DISK
C5550 MFP User's Guide
A guide to printing > 202
PROFILES