Nortel 5109 User's Manual And Command Reference page 198

Nortel Switched Firewall 2.3.3 User's Guide and Command Reference
4. From the Gateway Cluster Properties menu, select Topology.
The Edit Topology page appears (see
TIP: Check Point cannot identify a pure Layer 2 bridge device because the bridge interface
does not hold a valid IP address.
Figure 100 Edit Topology
5. To manually add port 3 and 4, click Add Network.
Manually add port 3 and 4 to eth2, eth3 with IP subnet 172.16.5.0/255.255.255.0 (host PC IP
address range).
198 Layer 2 and Layer 3 Firewalls
Figure 100).
213455-L, October 2005