Niles ZR-6 Installation Manual page 40

IR PROGRAMMING
PROGRAMMING SOURCE DEVICE IR COMMAND CODES
#5
#6
#7
#8
#9
#0
Enter
Channel Up
Channel Down
Last
Menu
Guide
Info
List
Exit
Red
Green
Yellow
Blue
Input
Replay
Disc
Page Up
Page Down
Live
Fav
Random
Group
The command list is looped so that pressing Previous with "Power
ON" in the display moves to "Group".
38
CONSIDERATIONS:
• All zones should be off before entering programming mode.
• It is not necessary to learn all devices, or all commands for
any device.
• Pages for devices not named in the "Source Naming"
confi guration will not appear when learning IR codes.
• Pressing the Program button at any time will move to the
next memory page (source device, library or sequence). Any
commands stored on that page will be saved before moving
to the next page.
• Pressing the Previous and Next (or the + and -) buttons move
through the options within a memory page.
• Pressing-and-holding the Program button at any time while
in programming mode will exit programming mode. Any
commands stored prior will be saved.
• The source device factory remote controls must be in
working order and have fresh batteries in order to learn IR
codes properly.
• The learning capacity for each memory page (source, or
library) is approximately 42 to 75 commands, depending on
the complexity of the commands being learned
• Certain device functions cannot be learned, including multi-
frequency codes, some high frequency codes and other
unusual formats. An "IR INVALID" message will appear on
the display should one of these codes be encountered.
• For best results, avoid high levels of ambient light, such as
natural sunlight or fl uorescent lighting.
• For future reference, it is recommended that the learned IR
command information be recorded on the forms provided in
the Appendix.
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373