Niles ZR-6 Installation Manual page 38

SYSTEM CONFIGURATION
CONFIGURING THE ZR-6 MULTIZONE RECEIVER
Available source device names:
Radio (default Source 1)
• N/A • CD Ch 3
• Blu-ray • DMS
• Cable • DMS 2
• Cable 2 • DMS 3
• Cable 3 • DMS 4
• CD • DVD
• CD 2 • DVD 2
• CD 3 • DVD Ch
• CD Ch • DVD Ch 2
• DVR
• CD Ch 2
The corresponding Solo-6 MD Master Keypad screen displays are
shown in an appendix at the end of this document.
To continue to the next confi guration step, ERASING TUNER PRESET
INFORMATION, press the Set button.
To save the settings and exit confi guration mode, simultaneously
hold down the Band and Set buttons. After the ZR-6 saves the
information, [RELEASE BUTTONS TO CONTINUE] appears on the
display. The ZR-6 will return to the normal operating mode.
ERASING TUNER PRESET INFORMATION
While in confi guration mode, press the Set button until the display
shows [ERASE PRESETS?]
E R A S E P R E S E T S ?
- / N O + / Y E S
Press + to erase all 20 tuner presets stored into the ZR-6. The
display will show [PRESETS ERASED].
P R E S E T S E R A S E D
Press the – button to exit and move to the next step without erasing
any of the presets.
36
iPod (default Source 2)
• HDTV • SAT TV 2
• MP3 • SAT TV 3
• DVD Ch 2 • TV
• Music • TV 2
• Music 2 • Video
• PC • Video 2
• SAT Radio
• SAT Radio 2
• SAT TV
To continue to the next confi guration step, RESTORING FACTORY
DEFAULTS, press the Set button.
To save the settings and exit confi guration mode, simultaneously
hold down the Band and Set buttons. After the ZR-6 saves the
information, [RELEASE BUTTONS TO CONTINUE] appears on the
display. The ZR-6 will return to the normal operating mode.
RESTORING THE FACTORY DEFAULTS
While in confi guration mode, press the Set button until
[FACTORY RESET] appears on the display.
F A C T O R Y R E S E T
- / N O + / Y E S
Press + to erase all confi guration data. All Master/Slave, zone
linking, paging, party mode, bass, treble, and loudness settings
will return to the factory default. The display will show [CONFIRM
ERASE].
C O N F I R M E R A S E
- / N O + / Y E S
Press the + button to confi rm the erase procedure. The display will
show [MASTER DEFAULT RESTORED].
M A S T E R
D E F A U L T R E S T O R E D
Press the – button (at either screen) to exit and move to the next
step without erasing any information.
To continue to the fi rst confi guration step, MASTER/SLAVE, press
the Set button.
To save the settings and exit confi guration mode, simultaneously
hold down the Band and Set buttons. After the ZR-6 saves the
information, [RELEASE BUTTONS TO CONTINUE] appears on the
display. The ZR-6 will return to the normal operating mode .
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373