Turning Off The Projector - NEC NP300 User Manual

7 Turning off the Projector

To turn off the projector:
1. First, press the
cabinet or the POWER OFF button on the remote con-
trol. The [POWER OFF / ARE YOU SURE?] message will
appear.
2. Secondly, press the ENTER button or press the
(POWER) or the POWER OFF button again.
The power indicator will glow orange. After the projec-
tor turns off, the cooling fans keep operating for 30
seconds (Cool-down time).
Immediately after turning on the projector and display-
ing an image, you cannot turn off the projector for 60
seconds.
3. Finally, turn off the Main Power switch. The power indi-
cator will go out.
NOTE: Do not turn off the main power within 10 seconds of making
adjustment or setting changes and closing the menu.
Doing so can cause loss of adjustments and settings.
CAUTION:
Parts of the projector will become heated during operation. Use caution when picking up the projector immediately
after it has been operating.
CAUTION:
The projector cannot be turned off for 60 seconds after the lamp is turned on and while the POWER indicator is
blinking green. Doing so could cause premature lamp failure.
(POWER) button on the projector
3. Projecting an Image (Basic Operation)
MENU
SELECT
SOURCE
Power On
Steady green
light
8
OFF
POWER
MAGNIFY PIC-MUTE
MENU
LAMP
STATUS
ENTER
AUTO ADJ.
Fan running
Blinking
orange light
ON
PAGE
UP
DOWN
EXIT
Standby
Steady
orange light