Introduction To The Projector; Congratulations On Your Purchase Of The Projector; Features You'll Enjoy - NEC NP300 User Manual

 Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of the Projector

This projector is one of the very best projectors available today. The projector enables you to project precise images
up to 300 inches (110 inches on NP600S; 104 inches on NP500WS) across (measured diagonally) from your PC or
Macintosh computer (desktop or notebook), VCR, DVD player, or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen,
and the projector can be permanently mounted on a ceiling*
* Do not attempt to mount the projector on a ceiling yourself.
1
The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk
of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes. Please consult your dealer for more information.

Features you'll enjoy:

• Quck start & Drect Power Off
Eight seconds after turning on the power, the projector is ready to display PC or video images.
The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when
projecting an image) using a power strip equipped with a switch and a breaker.
• AUTO POWER ON and AUTO POWER OFF features
The AUTO POWER ON(AC), AUTO POWER ON(COMP1), AUTO POWER OFF, and OFF TIMER features eliminate
the need to always use the POWER button on the remote control or projector cabinet.
• Short throw dstances (NP600S/NP500WS)
Short focal lenses provide for a larger image using a shorter throw distance when compared to a typical projector
lens.
• Vrtual Remote functon
The Virtual Remote function allows power On/Off and source selection of the projector from your PC by using the
supplied VGA signal cable. The utility software "Virtual Remote Tool" exclusively for the projector is required to be
downloaded from our website.
• The optonal remote control (NP0RC) allows you to assgn a CONTROL ID to the projector
Multiple projectors can be operated separately and independently with the same single remote control by assigning
an ID number to each projector.
• A varety of nput ports and a comprehensve array of system control nterfaces
This projector supports input signals on the following ports: DVI-I connector (DVI-I 29 Pin) with HDCP compatible,
15pin D-Sub, composite and S-video.
• Integrated RJ-45 connector for wred networkng capablty
An RJ-45 connector is equipped as standard feature.
• 7W bult-n speaker for an ntegrated audo soluton
Powerful 7 watt speaker provides volume need for large rooms.
• Auto vertcal keystone correcton
Auto Keystone feature allows the projector to detect its tilt and correct vertical distortion automatically.
• LCD projector wth hgh resoluton and hgh brghtness
High resolution display - up to UXGA compatible, XGA (NP600/NP500/NP400/NP300/NP600S)/WXGA (NP500W/
NP500WS) native resolution.
. The remote control can be used wirelessly.
1

1. Introduction