Connecting Your DVD Player with Component Output
Audio Equipment
Audio cable (not supplied)
A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] →
[SIGNAL SELECT] → [COMPUTER1], and then place a check mark in the Component radio button.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER 1 IN
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.
COMPUTER 1 IN
AUDIO IN
L
R
SOURCE button on the projector
cabinet
COMPUTER1
2. Installation and Connections
AUDIO IN
15-pin - to - RCA (fe-
male) 3 cable adapter
(ADP-CV1E)
DVD player
L
R
Y
Cb
Cr
AUDIO OUT
Component
Button on the remote control
Component video RCA3
cable (not supplied)
(COMPUTER 1)