Channelview Channel Listings; Redirecting Audio Output; Controlling A/V Receiver Sound Volume - Mitsubishi Electric LaserVue L75-A91 Owner's Manual

26
3. Using TV Features

ChannelView Channel Listings

ChannelView displays program descriptions sent by
broadcasters. This information may be unavailable
in some areas.
ChannelView. Programs for the tuned channel are
listed on right side of screen.
ChannelView™ shows memorized channels on the ANT
input. It displays channel names and program infor-
mation for digital channels as sent by broadcasters or
your local cable service provider (information may be
unavailable in some areas). No program information is
displayed for analog channels.
Note: You must set the TV Clock (page 43) to receive
ChannelView listings for the current channel.
Using ChannelView
Feature
Display/hide ChannelView
listings from the ANT
input.
Receive updates for a
digital channel.
Scan channels one by one. Hold
Scan channels quickly.
Jump to listings for a spe-
cific channel.
See more of the program
description for the current
channel (if available).
Tune to the highlighted
channel.
In Canada call 1(800) 450-6487 for assistance.
Instructions
GUIDE
1. Press to
highlight a channel
number.
2. Press the INFO key
(the screen may
briefly go blank).
or
Hold PAGE UP/PAGE DN
1. Enter the channel
number.
2. Press ENTER.
INFO
ENTER

Redirecting Audio Output

Selecting an Audio Output Device
1.
Press MORE and then 9 (AUDIO).
2.
Press to show the Speakers option. The
Speakers option will display only if there is a rec-
ognized audio device on an audio output or HDMI
input.
3.
to select either AV Receiver, Head-
Press
phones, or TV.
Note: The Headphones option displays only if you
selected the name Headphones in the New
Device Found screen.
Disconnecting an Analog A/V Receiver
When you disconnect an analog A/V receiver, change
the Speakers setting to TV to hear sound from the TV
speakers. Change the setting using the remote con-
trol's MORE > 9 (AUDIO )key or the Adjust > Audio >
Speakers menu.
Controlling A/V Receiver Sound
Volume
Use one of the methods below to control sound volume from
an A/V receiver.
With a Standard TV Setup
• Recommended Method:
remote control for your A/V receiver and enable the
Audio Lock feature. See page 65.
• Program the TV's remote control for your A/V
receiver and set the TV remote control's mode to
AUDIO. Return the control mode to TV to control the
TV.
• Use the remote control that came with the A/V
receiver.
With HDMI Control (CEC-Enabled HDMI
A/V Receiver)
The TV's remote control may control some functions of
the A/V receiver. See Appendix C, "HDMI Control of
CEC Devices," page 73.
With NetCommand IR Control
Model L75-A91. Set up NetCommand control of the A/V
receiver's volume functions in the Inputs > AVR menu.
The TV's remote will then control A/V receiver volume.
See page 57.
Program the TV's