Inputs And Outputs - Mitsubishi Electric LaserVue L75-A91 Owner's Manual

Inputs and Outputs

1. ANT (Antenna)
Connect your main antenna or direct cable service
(no cable box) to ANT. The ANT input can receive
digital and analog over-the-air channels from a
VHF/UHF antenna or non-scrambled digital/analog
cable source.
2. 3D GLASSES EMITTER
Use this jack for the special IR emitter supplied
with 3D glasses. The emitter will send a signal that
synchronizes your 3D glasses with the screen display.
See page 29
3. IR–NetCommand Output/External
Controller Input
Connect IR emitters to this jack to send control
signals to external IR-controlled devices. This jack
can also serve as the input for an external controller.
4. Y Pb Pr (Component Video)
Connect devices with component video outputs to
this jack. Use the adjacent INPUT 1/INPUT 2 audio
R and L jacks if you wish to send audio to the TV.
5. VIDEO (Composite Video)
Connect a VCR, DVD player, standard satellite
receiver, or other A/V device to the TV. Use the
adjacent INPUT 1/INPUT 2 audio R and L jacks if you
wish to send audio to the TV.
6. L/R (Left/Right Analog Stereo Inputs)
Use with INPUT 1/INPUT 2 video inputs, items
and .
4 5
IR-NetCommand
Output/External
Controller offered
on L75-A91.
VIDEO
(composite video,
page 23)
Y Pb Pr
(component video,
page 21)
–
IR NetCommand
Output/External Con-
troller Input (page 51)
3D GLASSES EMITTER
(page 29)
ANT (page 22)
2. TV Connections
6
5
4
INPUT 1 INPUT 2
3
2
1
In the U.S. call 1(877) 675-2224 for assistance.
USBa and LAN jacks
offered on L75-A91.
USBa (power
14
only, page 34)
13
LAN (page 34)
11
RS-232 control
jack is offered on
L75-A91.
12
RS-232
7
HDMI 4 offered
on L75-A91.
DIGITAL AUDIO
8
OUTPUT
(page 24)
DVI/PC INPUT
9
(audio input,
page 22)
AVR AUDIO
10
OUTPUT
(page 24)
19
USB (page 31)
HDMI (page 21)