Mitsubishi Electric LaserVue L75-A91 Owner's Manual page 43

Adjust, continued
Picture+
PerfectColor
Using PerfectColor:
Highlight the PerfectColor™ icon and press ENTER to display the PerfectColor menu. Settings are retained
independently for each TV input.
Using PerfecTint
• To switch between PerfectColor™ and PerfecTint™ adjustments, highlight Adjust Mode and press
• Press
• Press
• Press CANCEL to restore default settings.
• Press MENU to return to the main menu.
Advanced
Picture
1. MENU. Under Picture+, highlight the Advanced Picture icon and press ENTER.
Press
2. Picture Mode highlighted, press ENTER to change from blank (undefined) to ADV.
With
L75-A91: Choose ADV1 (daytime settings) or ADV2 (nighttime settings).
3.
Use
4.
Press
5.
Use
6. MENU to return to the Advanced Picture menu. Press MENU again to close the menu and save
Press
settings. The Advanced Picture adjustments will be in effect for the current input.
To use the custom Picture Mode at a later time
Press MENU and go to Adjust > Picture > Picture Mode and:
L75-A81
SPECIAL if settings were saved by
• Select
your professional installer.
• Otherwise select
To return to the default values for Advanced Picture
Display the Picture+ > Advanced Picture menu and:
L75-A81
Highlight RESET Pic Mode and press ENTER.
3D Mode 3D Mode
Source
Format
Glasses L-R
Glasses
Control
PerfectColor Sliders
PerfectTint Sliders
to move from one color bar to the next.
to change settings.
Advanced Picture allows you to save highly customized picture adjust-
ments for each input. Mitsubishi recommends a professional
installer make these adjustments.
to highlight an option you wish to change and press ENTER to see the adjustment display.
to change settings.
to navigate to additional options and press
ADV.
On, Off
Checkerboard,
Top/Bottom
Standard,
Reverse
IR Emitter,
DLP Link
4. TV Menus
Adjusts the saturation (intensity) of six colors for the
current image source.
Adjusts six hues for the current image source
to change settings.
L75-A91
ct ISF Day or ISF Night if settings were
• Sele
saved by your professional installer.
• Otherwise select
L75-A91
1.
Highlight the
2. H ighlight RESET Pic Mode and press ENTER.
Repeat this separately for both ADV1 and ADV2.
Use the On setting for video games and movies that require 3-D glasses.
This setting applies only to the current input.
Note: 3D options are available only for 1080p 60-Hz video sources
connected to an HDMI input.
Selects the source format.
Synchronizes the 3D glasses with the image on screen to provide the
best 3D effect. Try Reverse if Standard seems incorrect.
Selects the control type for your 3D glasses.
In the U.S. call 1(877) 675-2224 for assistance.
ADV1 or ADV2.
Advanced Picture mode to change.
41
.