Maytag Jetclean Plus MDB6709AW Installation Instructions Manual page 9

Undercounter dishwasher plastic giant tub models
Hide thumbs Also See for Jetclean Plus MDB6709AW:
Table of Contents

Advertisement

Available languages

Available languages

Option B, No waste disposer – no air gap
No waste disposer – no air gap
Waste tee
Waste tee
Waste tee
Drain trap
Drain trap
1. Connect black end of of drain hose to waste
1
Black end
tee and cut if needed.
(Do not cut ribbed section.)
2. Attach black end of drain hose to waste tee
with a large silver drain hose clamp (provided).
2
Use pliers to squeeze clamp open and move
into position. If the drain hose was cut use a
1 " to 2" (3.8 to 5 cm) screw-type clamp (not
provided).
Option C, Waste disposer – with air gap
Waste disposer – with air gap
Screw-type clamps
Screw-type clamps
Screw-type clamps
Disposer inlet
Disposer inlet
1. Using a hammer and screwdriver, knock
1
plug into disposer.
2. Use needle-nose pliers to remove plug.
2
3. Connect black end of drain hose to air gap
and cut if needed. (Do not cut ribbed
3
Black end
section.)
4. Attach drain hose to air gap with large
silver drain hose clamp (provided). Use
4
pliers to squeeze clamp open and move
into position. If the drain hose was cut, use
a 1 " to 2" (3.8 to 5 cm) screw-type clamp
(not provided).
5
5. Use a rubber hose (not provided) with
screw-type clamps (not provided) to
connect from air gap to disposer inlet.
Screw-type
Large silver
drain hose clamp
clamp
Drain hose
Air gap
Air gap
Large silver drain
Large silver drain
hose clamp
hose clamp
(provided)
Rubber hose
connector
Drain hose
Drain trap
Option D, No waste disposer – with air gap
No waste disposer – with air gap
Screw-type clamps
Screw-type clamps
Screw-type clamps
Waste tee
Waste tee
Drain trap
Drain trap
1. Connect black end of drain hose to air gap
1
Black end
and cut if needed. (Do not cut ribbed
section.)
2. Attach drain hose to air gap with large silver
drain hose clamp (provided).
2
Use pliers to squeeze clamp open and move
into position. If the drain hose was cut, use a
1 " to 2" (3.8 to 5 cm) screw-type clamp
(not provided).
3
3. Use a rubber hose (not provided) with
screw-type clamps (not provided) to
connect from waste tee to air gap.
Air gap
Air gap
Large silver drain
Large silver drain
hose clamp
hose clamp
(provided)
Rubber hose
connector
Drain hose
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents