Maytag Jetclean Plus MDB6709AW Installation Instructions Manual page 17

Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
2
Direct Wire—Connect
ground wire
Form bare ground wire into a U-shaped hook. Wrap ground wire
hook clockwise around ground connector screw and under the
washer. Securely tighten ground connector.
3
Direct Wire—Connect
remaining wires
NOTE: Do not pre-twist stranded wire. Twist on UL Listed/CSA
Approved wire connector. Gently tug on wires to be sure both
are secured.
Connect wires black to black and white to white, using UL
Listed/CSA Approved twist-on wire connectors (not included).
Ground
Ground
wire
wire
Washer
Ground
connector
Wiring configuration
Power supply wire:
white
black
ground wire
If needed, see website for animated representation
of this step. Visit www.whirlpool.com/electrical under FAQ
tab.
4
Direct Wire—Secure cable
in conduit connector
Tighten strain relief screws to secure cable.
5
Direct Wire—Reinstall
terminal box cover
Place wires inside terminal box. Insert tabs on left side of cover.
Make sure wires are tucked inside box. Close cover ensuring
wires are not pinched. Use
removed screw to secure cover.
Terminal box wire:
white
black
ground connector
" nut driver and previously
17