Input Mode - Marantz NR1601 User Manual

Setting items
Component Comp1/Comp2/Comp3 (Component video)
Set this to change the None : Do not assign a component video input connector to the selected
component video input input source.
connectors assigned to the
input sources. • At time of purchase, the settings of the different input sources are as
shown below.
BD DVD SAT
Input
GAME AUX1 TV
source
Default
setting
An input source to which an component video input connector cannot
be assigned is displayed as "–".
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
Setting?" is displayed. Select "Yes" or "No", and then press
Video
Set the source video.
z"BD", "TV" or "GAME" can be set when "HDMI" (vpage 42) or "Component" (vpage 43) has been
assigned.
Setting items
Video Select Source : Play the picture and sound of the input source.
Video of another input BD / DVD / SAT : Select video input source to view. This can be set for
source is played back individual input sources.
combined with the playing
"BD", "TV" and "GAME" can be selected only when a component
audio.
video connector is assigned as an input source.
NOTE
• It is not possible to select HDMI input signals.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 52) cannot be selected.
Buttons on the remote control unit can be used
for operations.
V.SEL
Press until the desired picture appears.
• To cancel, press
Remote control operation
buttons
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
Setting details
BD DVD SAT GAME
Component Component Component
None
1 2 3
ENTER
, the message "Default
Default settings are underlined.
Setting details
V.SEL
to select "Source".
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ESPAÑOL ITALIANO ITALIANO
Setting items
Video Mode
Make settings for video
processing.
BD DVD SAT
GAME AUX1 TV
AUX1 TV
None None

Input Mode

The input modes available for selection may vary depending on the input source.
Setting items
Input Mode
Set the audio input modes
ENTER for the different input
.
sources.
Confirm the setting
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH
Setting details
Auto : Process video automatically based on the HDMI content
information.
Movie : Process video normally.
Game : Always process video appropriate for game content.
• This can be assigned to HDMI terminal in "Input Assign" in the menu.
• If "Video Mode" is set to "Auto", the mode is switched according to the
input contents.
Default settings are underlined.
Setting details
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
• "HDMI" can be set for input sources for which "HDMI" is assigned at
"Input Assign" (vpage 42).
• "Digital" can be set for input sources for which "Digital" is assigned at
"Input Assign" (vpage 42).
• If the input source is set to "TV" or "Game", it cannot be set to "Analog".
• When digital signals are properly input, the
the display. If the indicator does not light, check the digital input
connector assignment and the connections.
• If "HDMI Control" is set to "ON" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
A/D
This can also be set by pressing on the
remote control unit.
A/D
Each time is pressed, the setting is
changed as shown below.
Auto HDMI Digital
Return to previous menu
ENGLISH ENGLISH
Input Setup
indicator lights on
Analog
43