MSI MS-9282 User Manual page 47

9. Follow the same procedures to in-
stall the second CPU.
Note: To install DUAL CPUs
on the board, you must use
the same types of CPUs
running at the same FSB
frequency.
10. Place the heat sink on top of the CPU and secure the screws on both sides.
Note:
1. The heatsink is labeled for correct orientation. Make sure that the side
with "DIMM Side" label (as indicated below with blue circle) is faced to
the memory DIMM slots.
2. Avoid forcibly pushing down the heatsinks during installation. Otherwise,
the CPU may be damaged.
11. Follow the same procedures to in-
stall the second heatsink.
Note: To ensure proper cooling,
make s ure the heatsink s are
properly installed.
Hardware Setup
2-23