MSI MS-9282 User Manual page 132

M S-9282 Server
2. Press Enter to go to the Adapter Properties screen, shown in Figure 5.1.
3. On the Adapter Properties screen, use the arrow keys to select RAID Proper-
ties on the screen and press Enter.
4. W hen you are prompted to select a volume type, select Create IS Volume.
The Create New Array screen shows a list of disks that can be added to a
volume.
5. Move the cursor to the "RAID Disk" column. To add a disk to the volume, change
the "No" to "Yes" by pressing the + key, . key, or space bar. As disks are
added, the Array Size field changes to reflect the size of the new volume.
There are several limitations when creating an IS (RAID 0) volume:
– All disks must be either SATA (with extended command set support) or SAS
(with SMART support).
– Disks must have 512-byte blocks and must not have removable media.
– There must be at least 2 and no more than 8 drives in a valid IS volume. Hot
spare drives are not allowed.
B-20