MSI MS-9249 User Manual page 63

4. Secondary Slave
=> Compatible Mode with Serial ATA Port 0 set to Secondary Slave
5. Logical Primary
=> Compatible Mode with only Serial ATA Enabled and Port 0 set to Pri-
mary Master
6. Logical Secondary
=> Compatible Mode with only Serial ATA Enabled and Port 0 set to Sec-
ondary Master
7. Enhance Mode Port 0 ( Tertiary Master )
=> Enhance Mode with Port 0 set to Native Mode Master
8. Enhance Mode Port 1 ( Quaternary Master )
=> Enhance Mode with Port 1 set to Native Mode Master
Onboard Device
Press <Enter> to enter the following sub-menu screen.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have USB peripherals. Setting options: Enabled, Disabled.
USB 2.0 Controller
Set to Enabled if you need to use any USB 2.0 device in the operating
system that does not support or have any USB 2.0 driver installed, such as
DOS and SCO Unix. Setting options: Disabled, Enabled.
BIOS Setup
3-19