Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
S/PDIF-Out Connector: JSPD1 (2pin, 3pin optional)
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format)
interface for digital audio transmission.
SPDIFO
JSPD1 (2pin, for HDMI
graphics card)
CD-In Connector: JCD1
This connector is provided for external audio input.
1
CINTRU
GND
2
JCI1
GND
VCC
JSPD1 (3pin)
GND
L
R
JCD1
Hardware Setup
GND
SPDIF
2-15