MSI MS-7160 User Manual page 46

5. After the hardware installation is completed, restart the system and install
the NV SLI driver/utility. A configuration panel will be provided for Multi-GPU
control. Check the Enable multi-GPU box to enable the SLI function for the
onboard graphics cards (concerning the details of multi-GPU settings, please
refer to your graphics card manual) .
Check the box
6. Restart your system and a pop-up will show in the system tray confirming
that M ulti-GPU has been enabled.
MSI Reminds You...
If you want to remove one graphics card and quit the SLI function, make
sure that you reset the SLI switch card (SLI mode to non-SLI mode) and
disable the "MultiGPU" function.
Hardware Setup
2-29