Table of Contents
Advertisement
On-Board SATA
† MCP04 supports 4 SATA-II ports (SATA1-4). Transfer rate is up to 300 MB/s.
Supports RAID 0/ 1/ 0+1/ RAID 5 or JBOD mode.
† Silicon Image's SATARAID supports another 2 SATA-II ports (SATA5/6).
Transfer rate is up to 300 MB/s. Supports RAID 0 & 1 mode. (optional)
USB Interface
† 10 USB ports
- Controlled by nForce4 SLI Intel Edition MCP04 chip
- 4 ports in the rear I/O, 6 ports via the external bracket
NV RAID
† Supports up to 4 SATA and 4 ATA133 Hard drives
- RAID 0, 1, 0+1, 5 or JBOD is supported
- RAID function available for ATA133/ SATA H/D or ATA133 + SATA H/D drives
- Supports up to 8 drives for RAID function.
Silicon Image's SATARAID (Optional)
† RAID 0 or 1 and multiple RAID groups are supported
† Support up to 2 SATA devices
† Support External SATA devices by SATA Extend bracket
Dual Gigabit LAN
† Supports dual LAN jacks
- 1st LAN supports 10/100/1000 Fast Ethernet by nForce4 SLI Intel Edition
MCP04 south bridge
- 2nd PCI Express LAN supports 10/100/1000 Fast Ethernet by Marvell
88E8053 (optional)
IEEE 1394 (optional)
† Supports up to three 1394 ports (rear panel x 1, pinheader x 2). Transfer rate
is up to 400Mbps
Audio ALC850
† Chip integrated by Realtek ALC850 (7.1 ch S/W audio)
- Compliant with AC'97 2.3 Spec.
On-Board Peripherals
† On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 1 serial port (COM1)
- 1 parallel port supporting SPP/EPP/ECP mode
- 1 Audio jack(5-in-1), coaxial/fiber SPDIF out
Getting Started
1 - 3
Hide quick links:
Advertisement
Table of Contents
