The motherboard provides the following jumpers for you to set the computer's
function. This section will explain how to change your motherboard's function through
the use of button.
Clear CMOS Button: SW1
There is a CMOS RAM on board that has a power supply from external battery
to keep the system configuration data. W ith the CMOS RAM, the system can auto-
matically boot OS every time it is turned on. If you want to clear the system configuration,
use the SW 1 (Clear CMOS Button) to clear data. Press the button in the middle of the
connector top side to clear the data.
Button
SW1
Hardware Setup
2-25