Jumpers; Clear Cmos Jumper: Jbat1 - MSI MS-6380LE User Manual

Jumpers

The motherboard provides the following jumpers for you to set the
computer's function. This section will explain how to change your
motherboard's function through the use of jumpers.

Clear CMOS Jumper: JBAT1

There is a CMOS RAM on board that has a power supply from external
battery to keep the data of system configuration. With the CMOS RAM, the
system can automatically boot OS every time it is turned on. If you want to
clear the system configuration, use the JBAT1 (Clear CMOS Jumper ) to clear
data. Follow the instructions below to clear the data:
You can clear CMOS by shorting 2-3 pin while the
system is off. Then return to 1-2 pin position. Avoid
WARNING!
clearing the CMOS while the system is on; it will dam-
age the mainboard.
3
1
Keep Data
2-27
Hardware Setup
JBAT1
3
1
Clear Data
1