Serial Ata/Serial Ata Raid Connectors Controlled By - MSI 915G Combo User Manual

MS-7058 ATX Mainboard
Serial ATA/Serial ATA RAID Connectors controlled by Intel ICH6/
ICH6R: SATA1~SATA4
The SouthBridge of this mainboard is Intel ICH6/ICH6R which supports four
serial ATA connectors SATA1~SATA4.
SATA1~SATA4 are dual high-speed Serial ATA interface ports. Each supports
st
1 generation serial ATA data rates of 150 MB/s. Both connectors are fully compliant
with Serial ATA 1.0 specifications. Each Serial ATA connector can connect to 1 hard
disk device. Please refer to the Chapter 5: Intel ICH6R RAID Introduction for detail
software installation procedure.
SATA4 SATA3
SATA2 SATA1
Serial ATA cable
Connect to serial ATA ports
MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, since
this might cause the loss of data during the transmission.
2-16
PIN
1
1
3
7
5
7
1
7
SATA1~ SATA4 Pin Definition
SIGNAL PIN SIGNAL
GND 2 TXP
TXN 4 GND
RXN 6 RXP
GND
Take out the dust cover and
connect to the hard disk
devices