MS-7058 ATX Mainboard
Once the installation is complete, go to Start ---> Programs --->VIA --->
RAID to enable VIA RAID TOOL.
After the software has finished installation, it
will automatically start every time Windows is initiated.
You may double-click on the
system tray of the tool bar to launch the VIA RAID Tool
utility.
The main interface is divided into two windows and the toolbar above contain
the main functions. Click on these toolbar buttons to execute their specific functions.
The left window pane displays the controller and disk drives. The right window pane
displays the details of the controller or disk drives. In this model, the available fea-
tures are as following:
6-18
Using VIA RAID Tool
icon shown in the
View by Controllers
Check All Disks
View Event log
Help Topics