Table of Contents
Advertisement
MS-7058 ATX Mainboard
The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN,
USB Ports and CPU/System FAN.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Fan Power Connectors: CPUFAN2/SYSFAN1/NBFAN1/PWRFAN1
The CPUFAN2 (processor fan), SYSFAN1 (system fan 1), NBFAN1 (NorthBridge
Chipset fan) and PWRFAN1 (power fan) support system cooling fan with +12V. It
supports four/three-pin head connector. When connecting the wire to the connectors,
always take note that the red wire is the positive and should be connected to the
+12V, the black wire is Ground and should be connected to GND. If the mainboard
has a System Hardware Monitor chipset on-board, you must use a specially de-
signed fan with speed sensor to take advantage of the CPU fan control.
GND
+12V
Sensor
Control
CPUFAN2
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN2 supports the fan control. Fan/heatsink with 3 or 4 fins
are both available.
3. Be sure to configure the CPU FAN PIN Select in BIOS for the
CPU Fan you are using first. Please refer P.3-19 for details.
4. Please refer to the recommended CPU fans at Intel
website.
2-14
Connectors
FDD1
GND
+12V
NC
SYSFAN1
PWRFAN1
GND
GND
+12V
+12V
NC
Sensor
NBFAN1
®
official
Hide quick links:
Advertisement
Table of Contents
