MSI Hetis 865GV Series User Manual page 80

Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
OnBoard FDC
Select Enabled if your system has a floppy disk controller (FDD) installed
on the system board and you wish to use it.
Option
Auto
Enabled
Disabled
Onboard Serial Port A
These items specify the base I/O port addresses of the onboard Serial
Port 1 (COM A). Selecting Auto allows AMIBIOS to automatically deter-
mine the correct base I/O port address. Settings: Auto, 3F8/COM1, 2F8/
COM2, 3E8/COM3, 2E8/COM4 and Disabled.
Onboard Parallel Port
This field specifies the base I/O port address of the onboard parallel port.
Selecting Auto allows AMIBIOS to automatically determine the correct
base I/O port address. Settings: Auto, 378, 278, 3BC and Disabled.
Parallel Port Mode
This item selects the operation mode for the onboard parallel port: ECP,
Normal, Bi-Dir or EPP.
Description
BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enables the onboard Floppy controller.
Disables the onboard Floppy controller.
4-25
BIOS Setup