MSI Hetis 865GV Series User Manual page 73

Chapter 4
- You need to install a modem card supporting power on function
for "Resume On Ring" function.
Resume On PME#
This field specifies whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings: Enabled, Disabled.
Resume By RTC Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the soft off (S5) state. Settings: Enabled,
Disabled.
RTC Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically resume
(boot up) on a specific date/hour/minute/second specified in these fields.
Available settings for each item are:
Alarm Date
Alarm Hour
Alarm Minute
Alarm Second
If you have changed this setting, you must let the system
boot up until it enters the operating system, before this
function will work.
01 ~ 31, Every Day
00 ~ 23
00 ~ 59
00 ~ 59
4-18