MSI Hetis 865GV Series User Manual page 72

FDC/LPT/COM Ports, Primary/Secondary Master/Slave IDE
These items specify if the BIOS will monitor the activity of the specified
hardware peripherals or components. If set to Monitor, any activity
detected on the specified hardware peripherals or components will wake
up the system or prevent the system from entering the power saving
modes. Settings: Monitor, Ignore.
Set WakeUp Events
Press <Enter> and the following submenu appears.
USB Device Wakeup From S3
This item allows the activity of the USB devices (keyboard and mouse) to
wake up the system from S3 sleep state. Setting: Enabled, Disabled.
Keyboard/Mouse Wake up From S3, Resume on Ring
These two fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
- In "Keyboard Wake up From S3", you have two options: "any
key" & "disabled". Selecting "any key" allows you to power on
the system by pressing any key.
- In "Mouse Wake up From S3", you have two options: "disabled"
& "enabled". Selecting "enabled" allows you to power on the
system by clicking on the mouse.
4-17
BIOS Setup