Table of Contents
Advertisement
Chapter 4
Init. Graphics Adapter Priority
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
Internal VGA
PCI/Int-VGA
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local
bus has bus mastering capability. Setting options: Disabled, Enabled.
PCI Slot1 IRQ Priority, PCI Slot2 IRQ Priority
These items specify the IRQ line for each PCI slot. Setting options: 3, 4, 5, 7, 9,
10, 11, Auto. Selecting Auto allows BIOS to automatically determine the IRQ
line for each PCI slot.
Set IRQs to PCI or ISA
Press <Enter> to enter the sub-menu and the following screen appears:
The system initializes the onboard VGA device.
The system initializes the installed PCI VGA
card first. If a PCI VGA card is not available, it
will initialize the onboard VGA device.
4-20
Advertisement
Table of Contents
