Delete Trail; New Trail - Lowrance LMS-320 Operation Instructions Manual

it, the beginning points are taken away and placed at the end of the trail.
From the Trails Menu, press → to
→ ←
Press or
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mi.
With one of the Update Criteria selected, use the cursor arrows to
highlight either the
. Press ↑ or ↓ to change the first character, then press → to
press
ENT
the next character and repeat until the entry is correct. Press
return to the Trail Options Menu.
Trail Options menu: Update Time Rate setting, left, and Update Dis-
Specific Trail Options

Delete Trail

To delete a specific trail: From the Trails Menu, press ↓
Name| . The Edit Trail menu appears as seen in the following fig-
ENT
ure. Press → to

New Trail

To manually start a new trail, in the Trails Menu, make sure
is highlighted and press
criteria type|
to select
U R
PDATE
tance setting, right.
|
D T
ELETE RAIL
Edit Trail menu.
ENT
O
PTIONS
ENT.
or
U
ATE PDATE
|← to
ENT Y
ES
.
168
| |↓ to
ENT
data entry boxes and
D
ISTANCE
| .
ENT
U C
PDATE RITERIA
to
EXIT
to Trail
N T
EW RAIL
.