Fill Land Gray; Map Overlays (Range Rings; Lat/Long Grid); Map Datum Selection - Lowrance LMS-320 Operation Instructions Manual

Map Boundaries
From the Map Page, press
. With the option highlighted, press
B
OUNDARIES
and uncheck it (turn off.) After the option is set, press
turn to the page display.

Fill Land Gray

From the Map Page, press
. With the option highlighted, press
L G
AND RAY
and uncheck it (turn off.) After the option is set, press
turn to the page display.

Map Overlays (Range Rings; Lat/Long Grid)

The map screen can be customized with four range rings and/or grids
that divide the plotter into equal segments of latitude and longitude.
Range rings are handy for visually estimating distances on the map.
The ring diameters are based on the current zoom range. For example:
at the 100 mile zoom, the screen will show two rings with your current
position in the center. The large ring touching the left and right sides of
the screen is 100 miles in diameter (same as the zoom range). The sec-
ond smaller ring is 50 miles in diameter (always 1/2 the zoom range).
The distance from your current position to the smaller ring (the ring's
radius) is 25 miles (always 1/4 the zoom range). With the arrow keys
and map cursor, you can scroll the map to see the third and fourth
rings. In this example, the distance to the third ring is 75 miles and
distance to the fourth ring is 100 miles from your current position.
To set range rings: From the Map Page, press
. Press ↓ to
|
D ENT
ATA
to check it (turn on) and uncheck it (turn off.) After the option is
ENT
set, press
EXIT
To set Lat/Long Grid: From the Map Page, press
. Press ↓ to
|
D ENT
ATA
press to check it (turn on) and uncheck it (turn off.) After the op-
ENT
tion is set, press

Map Datum Selection

Maps and charts are based on a survey of the area that's covered by the
map or chart. These surveys are called "Datums." Maps that are cre-
ated using different datums will show the same latitude/longitude in
slightly different locations.
R
ANGE
| to return to the page display.
EXIT
L /L
AT
| to return to the page display.
EXIT EXIT
|↓ to
MENU M
|↓ to
MENU M
. With the option highlighted, press
R
INGS
. With the option highlighted,
G L
ON RID INES
152
. Press ↓ to
|
D ENT
AP ATA
to check it (turn on)
ENT
EXIT
. Press ↓ to
|
D ENT
AP ATA
to check it (turn on)
ENT
EXIT
MENU
MENU
M
AP
| to re-
EXIT
F
ILL
| to re-
EXIT
|↓ to
M
AP
|↓ to
M
AP