Table of Contents
Advertisement
My Trails command (left); Trails Menu (left); Trail Options (right).
Delete All Trails
To remove all of the trails from memory: from the Trails Menu, press →
to
|
D
A
ENT|←
ELETE
LL
Update Trail Option
This menu lets you change the way the trail updates occur.
WARNING:
If you uncheck the Update Trail option, automatic trail
creation and recording will be turned off. You must turn
it back on to record trails. The default setting is on.
From the Trails Menu, press → to
highlighted, press
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
From the Trails Menu, press → to
Press ↑ or ↓ to select criteria type|
Update Rate data entry box appears on the menu. If you selected
Distance, the Update Distance data entry box appears on the menu.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999
seconds; the default is 3 seconds. You can update by distance, with a
range from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10
miles.
With one of the Update Criteria selected, use the cursor arrows to
highlight either the
press
. Press
ENT
the next character and repeat until the entry is correct. Press
return to the Trail Options Menu.
to
Y
|ENT.
ES
to check it (turn on) or uncheck it (turn off).
ENT
U
T
PDATE
IME
↑
↓
or
to change the first character, then press
|
O
ENT
PTIONS
T
O
RAIL
PTIONS
. If you selected Time, the
ENT
or
U
D
PDATE
ISTANCE
162
. With
U
PDATE
|
to
ENT|↓
U
PDATE
data entry boxes and
A
T
CTIVE
RAIL
.
C
RITERIA
→
to
to
EXIT
Hide quick links:
Advertisement
Table of Contents
