Gps Data Files - Lowrance LCX-20C Operation Instructions Manual

NOTE:
To load a Navionics

GPS Data files:

GPS Data Files contain waypoints, routes, trails and event marker
icons. Instructions for copying GPS Data Files between your computer
and a MMC are contained in the instruction manual for your MMC
card reader and MapCreate 6 software.
GPS data automatically recorded in the unit's internal memory must be
saved to the MMC as a GPS Data File in order to store it on your
personal computer. GPS Data Files stored on an MMC must be copied
from the card to the unit's internal memory before the unit can read
them. Here's how:
1. Insert the MMC into your unit. Press
| |↓ to
S ENT
ETUP
The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the unit's memory.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the unit to activate the Load or Save commands.
To transfer data from the unit to the MMC: press
To transfer data from the MMC to the unit: press
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ or ↓ to change the first character, then press
character and repeat until the name is correct. Then, press
|
S D ENT
AVE ATA

chart, see Sec. 8 for the entry Navionics Charts.
T M
RANSFER Y
S D
AVE
.
| and the screen below appears.
D ENT
ATA
| . If you wish to rename the file (as
ENT
ATA
ENT
123
|
MENU MENU
ENT
→
to activate the selection box.
|↓ to
S
YSTEM
(for .)
S
AVE
to | .
L ENT
OAD
→
to the next
↓
| to
ENT