Speaker And Relay Setup - Lorex QLR-0440 Series Instruction Manual

7. Speaker and Relay Setup

Speaker out:
Speaker out Enable: If checked, the speaker output is enabled.
Wave file: Setup the wave file for speaker output. (Use 'Play' to hear the file in advance.)
Working time: Schedule the time frame during which the speaker will be able to activate.
Alarm duration: Set the duration that the output will sound when an alarm occurs. (1~60 sec)
Delay time: Set a desired delay time. The speaker will sound after this delay time expires. (1~10 sec)
Relay out (1-8):
Relay out Enable: If checked, the relay output is enabled.
Description: A description of the relay or function may be entered in this location.
Working time: Schedule the time frame during which the relay will be able to activate.
Relay duration: Set the duration that the relay will activate when an alarm occurs. (1~60 sec)
Delay time: Set a desired delay time. The relay will activate after this delay time expires. (1~10 sec)
- 28 -