Relay Control; Ptz Control; Color Control; Audio Control - Lorex QLR-0440 Series Instruction Manual

Relay Control

PTZ Control

Color Control

Audio Control

Record Control
Channel Control

Full Screen Mode

Shutdown

Click the 'Relay' tab to bring up the relay controls.
Clicking these buttons will activate the corresponding external relay
outputs.
Click the 'PTZ' tab to bring up the Pan/Tilt/Zoom controls.
The following controls are available:
•
Camera Selection to control Pan/Tilt/Zoom/Focus
•
Tilt up/down (▲/▼)
•
Pan left/right (◄/►)
•
Zoom in/out (+/-)
•
Focus in/out (+/-)
•
Auxiliary (1,2,3)
Click the 'Color' tab to bring up the picture adjustment controls.
You are able to control the brightness, contrast, hue and saturation of the
video image.
Move the slider to control the audio volume.
The first button in this group enables/disables any recording schedules
defined in the Setup mode. Note that this affects all schedules, including
Motion and Sensor time sets.
Use the A or B buttons to set group recording 'ON' or 'OFF'.
Use the individual channel button to activate/deactivate recording on a
per channel basis.
Use these controls to change the display views.
Use the A or B buttons to select the two 8 channel groups.
Use the 1 – 8 channel buttons to select
Right click on the view screen and select Full Screen to expand to a full
screen view. Right click again to return to the default screen.
Click here to shutdown the Server program.
- 19 -