Lorex QLR-0440 Series Instruction Manual page 11

8)
Insert one side of PC Reset Pin connection cable (yellow cable) from the I/O Alarm board to the
Reset Pin on the PC main board. (Required for Watchdog Function)
9)
Connect the other side of PC Reset Pin connection cable (yellow cable) with the Reset Switch
connection cable on the front of PC case. (Required for Watchdog function)
10)
Close the PC case cover.
Alarm I/O Reset Pin Cable
VISTAPRO PC Reset Pin
Cable
Reset Switch cable connector
from PC Front case
Camera In (CH 1~4)
Optional Camera Power *
- 11 -
PC Main-board Reset Pin
VISTAPRO
4
Main board
I/O Alarm
Board **