Kyocera KM-3035 Operation Manual page 187

● Special paper action setting
When copying onto prepunched, preprinted or letterhead paper, and
performing both 1-sided copying and 2-sided copying from the same
drawer[cassette], the positioning of the holes in relation to the copied
image may be different for each copy or the front and rear images of
2-sided copies may be copied onto the opposites sides of the paper. If
you select "Adj. print Direction", both 1-sided and 2-sided copies will
be created with the same orientation.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Special paper action mode" ["Specif. paper action
mode"] in the settings list on the left side of the touch panel
and then touch the "Change #" key.
The "Special paper action mode" ["Specif. paper action
mode"] screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Paper type (3rd drawer)
Paper type (4th drawer)
Check bypass sizing
Select paper type (2sided)
Special paper action mode
Default setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Paper type (3rd cassette)
Paper type (4th cassette)
Check bypass sizing
Select paper type (2sided)
Specif. paper action mode
Default setting
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
Plain
Plain
Off
Speed priority
Change #
Setting mode
Plain
Plain
Off
Speed priority Change #
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Select "Adj. print Direction".
Inch specifications
Special paper action mode
Default setting - Machine default
Metric specifications
Specif. paper action mode
End
Counter
check
Default setting - Machine default
User
Adjustment
NOTES
• When "Adj. print Direction" is selected, the speed of 1-sided copying
will be somewhat slower than normal.
• If you want to quit the displayed setting without changing it, touch
End
the "Back" key. The touch panel will return to the screen in step 2.
Counter
check
User
Adjustment
4
Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6
Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Close
Up
Down
Possible to set action of the paper
(Prepunched, Preprinted, Letterhead)
Adj. print
Direction
Speed
Priority
Possible to set action of the paper
(Prepunched, Preprinted, Letterhead)
Adj. print
Direction
Speed
Priority
Back Close
Back Close
7-46-1