Kyocera KM-3035 Operation Manual page 105

7 Touch the "Bypass" key.
Touch the "Close" key. The touch panel will return to the
screen in step 6.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Select paper
11x8 1 / "
2
Plain
11x8 1 / "
2
Plain
11x8 1 / "
2
Color
8 1 / x14"
2
Plain
Metric specifications
Ready to Job build.
Set original. Press Start key.
Select paper
Plain
Plain
Colour
Plain
8 Set the first original ("A") to be copied. Press the [Start] key.
Scanning of the originals will start.
● Step 2: Leaving the back side of the first original ("A") blank
9 Touch the "Print from Front page" key.
Leaving the back side of the original blank will allow the next
copy to start on the front side of the next page.
Inch specifications
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
Job Build - Step2
1 sided
11x8 1 / "
2
Select Original
paper type
Offset AMS
Reduce
Finished
/Enlarge
Basic Quality
Metric specifications
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
Job Build- Step2
1-sided
Select Original
paper
type
Group AMS
Reduce/
Finished
Enlarge
Basic Quality
Back
Bypass
Plain
Back
Bypass
Plain
2 sided copy
Insert
page
1 sided/
2 sided
2 sided copy-Left
Back Edge
Finished page #:1
Orig. set Next copy page: Rear
direction
Edit
2-sided Copy
1-sided/
2-sided
2-sided Copy-Left
Back Edge
Finished page #: 1
Next copy page: Rear
Orig. set
direction
Edit
Section 5 OTHER CONVENIENT FUNCTIONS
● Step 3: Making the settings for the second originals ("B" in the
illustration on page 5-57.)
Drawer[Cassette] No.1 is to be selected for plain paper feed under the
"Select paper" screen.
10 Touch the "Select paper" key. The "Select paper" screen will
Set
be displayed.
Close
Inch specifications
Job Build - Step3
Select
paper
Offset
Finished
Set
Close
Metric specifications
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
Job Build - Step3
Select
paper
Finished
11 Touch the key that corresponds to drawer[cassette] No. 1.
Touch the "Close" key. The touch panel will return to the
screen in step 10.
Inch specifications
Select paper
Set
Cancel
Print from
Front page
Scanning
finished
Metric specifications
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
Set
Select paper
Cancel
Insert
blank page
Print from
front page
Scanning
finished
12 Set the second originals ("B") to be copied. Press the [Start]
key.
Scanning of the originals will start.
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
1 sided 2 sided copy
11x8 1 / "
2
Original 1 sided/
type 2 sided
AMS Back Edge
Reduce
Orig. set
direction
/Enlarge
Basic Quality Edit
1-sided 2-sided Copy
Original
1-sided/
type
2-sided
Back Edge
Group AMS
Reduce/ Orig. set
Enlarge direction
Basic Quality Edit
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
11x8 1 / "
2
Plain
11x8 1 / "
2
Plain
11x8 1 / " Bypass
2
Color Plain
8 1 / x14"
2
Plain
Plain
Plain
Bypass
Colour Plain
Plain
Set
Cancel
Insert
page
2 sided copy-Left
Print from
Finished page #:2
Rear page
Next copy page: Front
Scanning
finished
Set
Cancel
Insert
blank page
2-sided Copy-Left
Print from
Finished page #: 2
rear page
Next copy page: Front
Scanning
finished
Set
Back Close
Set
Back Close
5-59