SSL/TLS Setting
The Network/SSL/TLS Setting page allows you to select the following SSL/
TLS settings that appear.
Item
Create a self-signed
Certificate
Request a certificate
Install a certificate
Set a Encryption
Strength
Remove a certificate
Mode Using SSL/TLS
Configuring the Printer
Description
Creates a self-signed certificate.
Creates data for requesting that a certificate be
issued from a certificate authority.
Installs the certificate issued by the certificate
authority.
Specifies the encryption level. In addition, SSL/TLS
can be disabled.
If no certificate is installed, this item does not
appear.
Removes the certificate.
If no certificate is installed, this item does not
appear.
Specifies the SSL transmission mode.
If no certificate is installed, this item does not
appear.
201