Table of Contents
Advertisement
19. Paint: when engaged (and the Paint LED is lit), this
applies a posterized effect to the selected Main Video
Source. Repeated presses of the up and down
buttons set the intensity level of the effect, from
1 (least) to 4 (most). The level setting is
displayed in the Effects window above the
Keypad (21.).
20. Mosaic: when engaged (and the Mosaic LED is lit), this
turns the selected Main Source Video into a mosaic of
colored squares. There are 8 mosaic patterns to choose
from, selected by repeated presses of the up
and down buttons. The effect can be applied to
the whole image or one of two window sizes by
select PIP effect (18.) You can also use Joystick
(1.) mode to place the mosaic window in
anywhere on the screen.
21. Keypad: used to enter numerical data that
controls effects or transitions. The Effects
and Speed windows above the Keypad
display parameter information for the
selected effect or transition.
22. Transition selectors: These five selection buttons
determine the transition type and allow for the
selection of certain effects that are performed on
the selected Main Video Input channel. The
Take-button executes an auto play.
12
Advertisement
Table of Contents
