I Selecting A Frequency; D Using The Channel Selector; Selecting A Channel/Frequency; D Using The Keypad - Icom IC-M710RT Instruction Manual

Mf/hf marine transceiver
Hide thumbs Also See for IC-M710RT:
Table of Contents

Advertisement

3

SELECTING A CHANNEL/FREQUENCY

I Selecting a frequency

The transceiver has 0.5 to 30.0 MHz general coverage
receive capability with 100 Hz resolution. The receive
frequency can be changed instantly, independent of
the transmit frequency.

D Using the channel selector

Select a channel which is programmed near the
frequency you want to receive.
Push the [CE] key to select frequency selection
mode.
• "s" appears on the display.
Rotate the [CHANNEL] selector to change the fre-
quency.
To return to the previous frequency, push [CE].
• "s" disappears and the previous frequency or channel
name appears.

D Using the keypad

CAUTION:
user channel or ITU simplex channel by pushing
the [RX] key. However, when pushing and hold-
ing the [RX] key after entering a frequency, the
previously programmed contents are erased and
cannot be retrieved. Therefore, keypad entry
should be used only on spare channels.
Select the memory channel to be used for general
coverage use.
ALM
RX
TX
DSC
No frqeuency programmed channel for general
coverage use.
(mode and channel name do not appear)
Push [CE] to select frequency selection mode.
Enter the desired frequency with 5 or 6 digits.
Push [RX] to input the frequency.
• Do not hold [RX] for more than 0.5 sec., otherwise the
frequency will be programmed into the channel.
8
A frequency can be entered into a
AGC
F
NOTE: The selected frequency is used for tempo-
rary receiving (transmitting is not available). This
frequency is cleared once the channel is changed.
If you want to program a frequency, refer to p. 12.
ALM
RX
D U P
TX
DSC
No "≈" indicator shows that the channel will
CE
be changed when rotating [CHANNEL].
ALM
RX
D U P
TX
DSC
"≈" and frequency show that the frequency
will be changed.
[EXAMPLE]: Setting 12.3450 MHz
Select non frqeuency
programmed channel.
CE
1
2
3
4
5
0
RX
(momentarily)
After temporarily receiving.
CE
AGC
F
AGC
F
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
ALM
RX
AGC
TX
DSC
F
F
F
F
F
F
F

Advertisement

Table of Contents
loading

Table of Contents